          Tabla:

          The system used here to map the bols  (tabla syllables)
          to MIDI notes involved creating an interpretation of
          the tabla compositions for a Roland U220 tabla sample.
          Some compromise was necessary to arrange the material
          first for tabla samples, as they were not as complete
          as would be ideal, and then for General MIDI conga and
          bongo, but the general feeling of the compositions come
          through.

          The Bayan Drum

          The bayan  is the larger and lower in pitch of the two
          drums that comprise the tabla set. Its pitch is
          variable. To simulate this using the Roland U220
          sample, an auto bend function was used. The parameter
          was set so that it would not activate on staccato
          notes. Staccato notes where set to decay quickly, which
          allowed for the simulation of both an open variable
          pitch sound and a closed staccato sound with one
          sample. The notes were then mapped to coincide with the
          conga samples in the GM Standard MIDI setup.

          Suggested substitutions: If bayan samples are not
          available, try mixing a timpani sample with a conga
          sample.

          The Tabla Drum

          The tabla  is the smaller and higher in pitch of the
          two drums that comprise the tabla set. The tabla has
          both open and closed sounds. The most completely open
          sound of the tabla is a minor or major seventh below
          the tonic that the drum is tuned to.

          Suggested substitutes: sampled string harmonics mixed
          with sampled conga or bongo.

          MIDI Maps

          Tabla MIDI map (all channel 10):

          Tabla                                  Bols

          D#3 = open sound, 7th below tonic      di, din, ti, tun

          D3 = slightly dampened sound, tonic    di

          C#3 = half dampened sound, tonic       na, ta (long a)

          C3 = dampened sound                    ne, te, tet, ti, re, ri

          C3/D3 = half dampened sound, tonic     tin

          C3/C#3 = dampened sound                ta (short a)

          C#3,C3,D3,C3 = flam of four dampened   terikita (te,ri,ki,ta flam)

          Bayan MIDI map (all channel 10):

          Bayan                                  Bols

          E3 = open bayan                        ga, ge, gen

          D3 = closed bayan                      ka, kat, ke, ki

          Tabla/Bayan MIDI map (all channel 10):

          Tabla                  Bayan           Bols

          C3 = dampened          E3 = open       de (re + ge), dhe (te + ge)

          C#3 = half dampened    E3 = open       dha (na + ge)

          C3/D3 = half dampened  E3 = open       dhi, dhin (tin + ge)

          D#3 = open             E3 = open       dhi (tun + ge)

          C3 = dampened          D3 = closed     ka, kat, kre (ka,te flam), tre (re + ka)

                            [Indian Tala Button]

          -------------------------------------------------------
           info. E-mail: info@ancient-future.com . This site is
          supported by sales from the catalog. Support world
          music: buy direct from the artists![Image]
